You are here: HomeTeak Oil - Marine

Teak Oil - Marine

Teak Oil - Marine
Brand: Supreme Oils
Product Code: Teak Oil - Marine
Availability: In Stock

Available Options

* Please Select Size:


Teak Oil is premium quality, fast-drying wood oil designed for the marine environment, with a light Teak pigment to give added UV protection and will not crack or peel. This product is not a varnish (which sits on the surface) but is designed to penetrate into your timber giving a tough, durable finish whilst creating a warm natural lustre.

Uses: Exterior/Marine, suitable for teak decks, trims, coamings and interioir joinery where a hard-wearing, easily maintained finish is required.

Teak Oil - Marine

Recommended Use: Suitable for teak decks, trims, coamings and interior joinery where a hard-wearing, easily maintained finish is required.

Coverage: Previously oiled wood, 12-16 m2 per litre. Dressed smooth wood, 6-12 m2 per litre. Rough sawn or porous wood, 2-8 m2 per litre.

Preparation: Ensure wood is clean, dry and mould free with moisture content below 18%. Treat any mould or moss with appropriate product. Weathered or grey wood should be chemically treated and/or sanded to remove dead fibres, exposing fresh timber before oiling. Sand to the desired finish removing all old varnish.

Caution: Oily rags may self-ignite. Do not throw into rubbish bin. Soak rags in water and hang out to dry.


  • Shake Thoroughly Before Use
  • Use with adequate ventilation, read all instructions thoroughly.
  • Do not apply in damp, humid conditions or when surface and air temperature is below 10oC during application or drying.
  • On previously coated surfaces, apply Teak Oil to a test panel to ensure compatibility and thorough drying.

Failure to remove all excess oil a few minutes after application could result in a patchy, dull, glossy or skinned surface.

1ST COAT: Is a flood coat. Apply Teak Oil generously. After a few minutes soak-in time, before the oil becomes tacky, wipe surface with a clean, dry, lint free cloth to remove ALL excess oil. Allow to dry for 16hrs at 20oC.

2ND COAT: For fine finishes or if the timber fibres are standing up and the surface feels rough - lightly sand with a fine grit paper or fine synthetic pad. Dust off surface thoroughly. Apply Supreme Teak Oil more sparingly than the first coat, leave for a few minutes then buff off ALL excess oil using a soft dry cloth. Allow to dry for 16hrs at 20oC.

Further coats may be required depending on timber type and porosity and gloss level desired.

Maintenance: After initial full application, apply a maintenance coat every 6 - 18 months, depending on exposure to the elements. This will keep the wood fed, ensuring a new "wet" look and preventing the wood greying off. When the surface starts to look dull and flat it's time for a quick wipe over with Supreme Teak Oil.

Clean Up: Turpentine, general purpose thinners.



The information concerning the use of the product is given in good faith. Because we cannot control the way this product may be used or the conditions that it may be exposed to we can give no express guarantees in respect of this product or its performance. Neither the seller nor manufacturer shall be liable for any injury, direct or consequential, arising out of the use or inability to use this product.

Developed and Made in NZ from local and imported products.


DOWNLOAD Teak Oil - Marine SDS Sheet acrobat


 Haarlem Danish OilTung-OilTung-Oil-BlendTeak-Oil---Marine Garden-Furniture-Oil-ClearGarden-Furniture-Oil-KwilaVegetable-TurpentineBoiled-Linseed-Oil

"The Art of Wood Protection"


Your shopping cart is empty!

Customer Login

E-Mail Address:


Go to top UA-39498002-1